Armalex™ Laminate

Arm your graphics with Armalex...
and get the "Matte Look."

Armalex demonstrates amazing resistance to wear and tear from knee braces and boots.
Armalex is an 8 mil velvet textured, pressure sensitive laminate that is formulated to be a durable covering that resists harsh cleaners, chemicals and petroleum products. 

We have tested Armalex with everything from gasoline and hydraulic oil to sulfuric acid on samples for vehicles. 
Because Armalex is a laminate, you can use your favorite base material with the appropriate adhesive for the job.

Specifications

General Description: Rigid clear film with an embossed velvet texture and a clear permanent acrylic adhesive. Used for over laminating.

Excellent resistance to most cleaning chemicals, petroleum products, and abrasion. This film also exhibits excellent resistance to cracking (flex-stress tests) under the stress of push-button overlay applications.

Thickness	8 mil. film, plus 1. mil of adhesive.
Outdoor Life	5+ years
Shelf Life	2 years stored at 70º F & 50%RH
Adhesive Properties	General purpose permanent acrylic pressure sensitive adhesive works on most surfaces. Not recommended for direct application to low energy plastics.
Service Temperature Range	0º F to 175º F (-32°C to 40°C)
Minimum Application Temp.	50º F (10°C)

RECOMMENDED APPLICATION: Laminate with a cold pressure sensitive laminator or by hand. To much reverse tension (drag) on the laminate may cause curling in the finished product.

All of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the manufacturer or distributor of this product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the intended application.

DEI/GMS0904 GRAPHIC MARKING SYSTEMS