Convex® Laminate

Conforms so You Don’t Have To!

• Soft
• Highly conformable
• Durable

Use Convex Laminates when you need to apply graphics to complex curves such as Helmets and ATV fenders.

Softer than Pro-Shield, this laminate is thick but conforms easier to complex curves. Convex laminates are the softest and easiest for the average person to apply.

Laminate Convex to your graphics to give them the extra thickness and impact protection they need to survive in rough environments.

Specifications

General Description: Clear, soft, flexible vinyl with a clear permanent acrylic adhesive. Used for thermal resin transfer printing and over-laminating.

Thickness	4 mil vinyl with 1 mil. of adhesive 8 mil vinyl with 1 mil. of adhesive
Outdoor Life	2 years, Convex UV is 7 years
Shelf Life	1 years stored at 70º F & 50%RH
Adhesive Properties	General purpose permanent acrylic pressure sensitive adhesive works on most surfaces.
Service Temperature Range	-40º F to 176º F
Minimum Application Temp.	50º F

Recommended Application Techniques: Laminate with a cold pressure sensitive laminator or by hand. Too much reverse tension on the laminate roll will cause it to curl up after cutting.

All of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the manufacturer or distributor of this product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the intended application.

DEI/GMS0904 GRAPHIC MARKING SYSTEMS