Writable & Printable Laminate– Write-o! is a printable laminate. Laminate the liner of Convex to advertise your products. Remind your customers to reorder from YOU!
Convex™ Cold Weather • Vinyl that conforms to complex curves • Cold Weather adhesives can be applied freezing temperatures
Convex Cold Weather vinyl is used to make decals for cold weather applications. Although we recommend applying it above 32 degrees, customers have reported successful applications as low as 10 degrees.
Our customers have told us that Convex Cold Weather stickers and graphics have survived snowmobile wrecks where the sled was damaged but the decals were not... just re-applied after the sled was repaired.
Convex Cold Weather is also used on refrigeration equipment and refrigerator trucks where the temperature cannot easily be adjusted for application or varies too much for standard adhesives.
Software Settings: In Gerber’s Plot program, click on the “123” button then click on the substitute button and select vinyl type “220 or Imagecal-P” from the pull-down menu.
The default plotter settings for Imagecal-P” should work for the 4-mil Convex™.
A 60º blade is recommended for combinations resulting in a finished thickness over 8 mil. In Gerber’s Plot program, go to plotter settings “F7” and set the Speed to 50, Acceleration to 66, Force to 25 or more depending on the age of your blade, and Sharp Corners to 80.
All of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the manufacturer or distributor of this product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the intended application.
