Convex Conforms To Curves

Convex® GearWrap™

GearWrap Sticks to Helmets,
& Electronics.• Vinyl that conforms to complex curves
• GearWrap Adhesive sticks to plastics/metals

Convex GearWrap’s adhesive is designed for high-energy surfaces such as helmets and is cleanly removable for up to one year, which makes refurbishing easier.

The adhesive is a high-performance clear (initially repositionable) permanent pressure sensitive adhesive that is ideal for enamel painted surfaces, glass, stainless steel, aluminum, copper, vinyl and ABS plastics.

Most Conformable

 

 Tough

 

 Thickest
Convex and Convex Laminate Convex and Convex Laminate Convex and Convex Laminate
4 mil Convex GearWrap with
4 mil Convex Laminate
USE FOR:
Mini-helmets, Electronics, and Gear
4 mil Convex GearWrap with
8 mil Convex Laminate
USE FOR:
Higher Durability but Conformable
8 mil Convex GearWrap with
8 mil Convex Laminate
USE FOR:
18 mil, most durable for Helmets


 
Specs Solvent Inkjets Thermal Printers Laminates
 

Specifications

General Description: Clear and White, soft, flexible vinyl with a clear permanent acrylic adhesive. Convex™ base materials are intended to be used for thermal resin transfer/solvent inkjet printing and/or over-laminating.

Different combinations of Convex™ or Pro-Shield™ laminates can be used to achieve a variety of decal thicknesses. Please see the disclaimer at the bottom.

Thickness 4 or 8 mil vinyl with 1 mil. of adhesive.
Outdoor Life 2 years - Convex GearWrap
7 Years - Convex GearWrap UV
Shelf Life 2 years stored at 70º F & 50%RH
Adhesive Properties General purpose permanent acrylic pressure sensitive adhesive works on most surfaces. Not recommended for low energy plastics
Service Temp Range -40º F to 176º F
Minimum Application Temp. 50º F

Recommended Application Techniques:On curved surfaces such as helmets, apply by rubbing from the center out. When Convex Laminate is separated from the liner it is unsupported and can stretch during the laminating process. If there is too much reverse tension applied on the supply roll it will stretch and curl up immediately when it is cut. Laminate with a cold pressure sensitive laminator or by hand.

All of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the manufacturer or distributor of this product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the intended application.

DEI/GMS0904 GRAPHIC MARKING SYSTEMS