Specifications

General Description:Rigid clear film with an embossed velvet texture and a clear permanent acrylic adhesive.  Used for over laminating. 

Excellent resistance to most cleaning chemicals, petroleum products, and abrasion.  This film also exhibits excellent resistance to cracking (flex-stress tests) under the stress of push-button overlay applications.

Thickness	6 mil. PVC on a polyester liner
Shelf Life	2 years stored in cool dry conditions.  Keep away from heat sources and direct sunlight.
Service Temperature Range	32º F to 140º F
Minimum Application Temp.	305º F to 320º F / 8 -10 seconds, medium pressure.  Peel while hot.

RECOMMENDED APPLICATION: Use to transfer to 100% cotton, cotton blends, 100% polyester, polyester blends, and some nylons.  Test all processes including heat transfer and washing.  Application to sublimated garments can cause migration of fabric dyes into the Jersiprint.

Printing: For thermal transfer such as the Gerber Edge, use the 220 Scotchcal setting.  For EcoSol and Solvent ink jets, use a profile for polymer vinyl. Do not mirror the artwork.  Print “right reading.”

Shiny or Matte finish:  For a shiny effect, remove the printed art from the liner and place it in position on the fabric.  Cover the printed art with a silicone coated sheet while heat pressing. Peel Hot. (Silicone is generally what the non-stick side of vinyl liners are coated with.)  Test it to be sure.

For a Matte finish, place a piece of matte paper such as copier paper or kraft paper over the art once it is in position on the fabric.  Peel Hot.  Test it to be sure.

To Finish:  For the best seal, heat press for an additional 2-3 seconds if needed.

For intricate pieces:  Use Jersiprint mask to apply to the art after it is weeded to remove all pieces from the backing and keep their positions in relationship to each other.

Cutting: Cut the JersiPrint using a standard 45º blade.

Washing:  Allow the fabric to cure for 24 hrs. before washing the first time.  Do not wash above 140º F.  Use only mild detergents, no liquid detergent, bleaching agents or fabric softeners.  Dry using “delicate” setting.  Iron inside-out.  No dry-cleaning.

All of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the manufacturer or distributor of this product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the intended application.

DEI/GMS0904 GRAPHIC MARKING SYSTEMS