| |
Thicker is better with Convex laminate!
Many markets will ask for thick decals. And now that you know where to get it...
The most common used construction of vinyl and laminate for helmets is 4 & 4 and 8 & 8.
This means that a base of 4 or 8 mil vinyl (either white or clear) is printed and then laminated with a 4 or 8 mil clear laminate.
This offers the necessary conformability and pliability needed for a successful application without wrinkling.
And when you laminate with Convex Supreme UV, you create a super high gloss decal that lasts longer than most vehicles. The resulting product is easy for your clients to apply over curved surfaces.
The film and adhesive are also gas resistant, making it the perfect film for boats, jet skis, street bikes, etc.
|
This heavy duty, flexible clear vinyl laminate with a permanent acrylic adhesive has an extremely durable surface and a resistance to failure in abusive applications.
Pro-Shield is not as soft and pliable as Convex laminate, but it is high-gloss and tougher to rub through. It conforms well with the aid of a heat gun.
Pro-Shield was developed as a solution to shroud and air box areas on MX bikes that receive a tremendous amount of abrasion from boots & knee braces.
Available in: 7 mil, & 12 mil.
|