Motowrap™ Conformable Vinyl for Power Sport Graphics

Glossy. Conformable. Thermal, Solvent, Latex, and UV compatible.
  • Vinyl that conforms to complex curves.
  • High-Bond Adhesive sticks to plastics/powder paint.
  • Great for stickers for MX bikes, sleds, ATV’s and vehicle plastic.
  • Stays stuck in cold weather. Apply down to 32° F.
  • Great shelf life.
  • Most economical.

If you make power sport graphics, MotoWrap gives you the best mix of economy, adhesion and conformability to compete in the fast-paced decal market. MotoWrap is a 3 mil glossy white vinyl with 1.5 mils of specially formulated adhesive designed to conform and stick to plastics found on power sport vehicles. Try MotoWrap + Pro-Shield kits for the best savings. Haven’t tried MotoWrap? Or just need a small amount? We offer short run 10-yard kits.

MW-Logo

Dylan-Hall-Royal-Distributing-Race-Team-800x530

Overview

gerber

4 mil

White Gloss

inkjet

4 mil

White Gloss

If you make graphics, decals or stickers for MX bikes, ATVs, Super Bikes, Snowmobiles, Race cars, Stock Cars or Carts, or any other powersports, MotoWrap™ gives you the best mix of economy, adhesion and conformability to compete in the fast-paced decal market. MotoWrap is a 4 mil glossy white vinyl with a specially formulated adhesive designed to stick to plastics found on power sport vehicles.

Specifications

General Description: MotoWrap2 is a white vinyl with excellent conformability and a high strength high tack adhesive for smooth low energy plastic surfaces. MotoWrap2 works on thermal transfer printers and most non-aqueous based ink jet printers,

Different combinations of MotoWrap, Convex, Convex Supreme or Pro-Shield laminates can be used to achieve a variety of decal thicknesses and performance levels.

Thickness 3 mil vinyl with 1.5 mil of adhesive
Outdoor Life 4 Years
Shelf Life 2 years stored at 70º F & 50%RH
Adhesive Properties 1.5 mils of permanent acrylic pressure sensitive adhesive works for most surfaces including textured low energy plastic and metal surfaces
Service Temperature Range -40º F to 176º F
Minimum Application Temp. 32º F

Recommended Application Techniques: Prep molded plastic surfaces with acetone or alcohol to remove “mold release” and other contaminates from the surface. Apply dry or wet. High-Bond adhesive is not made for repositioning, so be sure to take care when applying.

All of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the manufacturer or distributor of this product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the intended application. DEI/GMS0414 GRAPHIC MARKING SYSTEMS

For Wide Format

MotoWrap Sizes

Width

Length

Part #

20 inches

10 yards

MW42010W2

20 inches

50 yards

MW42050W2

30 inches

10 yards

MW43010W2

30 inches

50 yards

MW43050W2

54 inches

50 yards

MW45450W2

60 inches

50 yards

MW6050W2

Custom Sizes Available

Software Settings: Although we do not offer specific profiles for inkjet printers on this material, we have found that most RIPS offer generic matte white vinyl profiles that require minimal adjustments to get excellent results. We will leave it to you to determine what is acceptable for the desired application.

All of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the manufacturer or distributor of this product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the intended application. DEI/GMS0414 GRAPHIC MARKING SYSTEMS

Thermal Printers

MotoWrap Pricing

Width

Length

Part #

15 inches

10 yards

MW41510W2

15 inches

50 yards

MW41550W2

Custom Sizes Available

USE A 60º BLADE on any combination of material 8 mil or thicker.

All of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the manufacturer or distributor of this product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the intended application. DEI/GMS0414 GRAPHIC MARKING SYSTEMS

Recommended Overlaminates

Pro-Shield_300x156

Pro-Shield Laminate: Thick, durable laminates that are flexible (but not as conformable) as Convex Laminates. Will conform with the aid of a heat gun. Now also available in 7 and 12 mil matte.

convex_uv

Convex Supreme UV is specially formulated to give you the best combination of UV durability and ease of application. This laminate is also petroleum resistant, making it perfect for watercraft and other applications where splashing fuel may occur.

Stubbl_200x58

Stubbl is a heavily textured, 18 mil-thick laminate that is designed for applications where you need to add traction (or grip). Great for watersports equipment, boats and hot tubs.